1. Get rid of all advertisements and get unlimited access to documents by upgrading to Premium Membership. Upgrade to Premium Now and also get a Premium Badge!

Installation of OBIEE in Unix hangs and don't complete

Discussion in 'Installation - Unix and Unix Like' started by arpeag, Jun 1, 2010.

  1. arpeag

    arpeag Guest

    Hi,

    This is my problem, I made an installation of OBIEE in Unix, but this hangs and don't complete, this is what I do:

    First at all, I uninstall completly OBIEE, because my customer need an installation from zero. I made this uninstallation with a "oracle" user in Unix.

    - I delete OracleBI and OracleBIData directories from directory where were installed.
    - Provided permission to all directories that I use, like directories where I will install OracleBI and OracleBIData directories, and where it is JDK.
    - Setup ulimit -n to 10240.
    - I setup kernel parameters with following values:
    Tunable Value Expression Changes
    NSTREVENT 50 Default
    NSTRPUSH 16 Default
    NSTRSCHED 0 Default
    STRCTLSZ 1024 Default
    STRMSGSZ 0 Default
    acctresume 4 Default
    acctsuspend 2 Default
    aio_listio_max 256 Default Immed
    aio_max_ops 2048 Default Immed
    aio_monitor_run_sec 30 Default Immed
    aio_physmem_pct 10 Default
    aio_prio_delta_max 20 Default Immed
    aio_proc_thread_pct 70 Default Immed
    aio_proc_threads 1024 Default Immed
    aio_req_per_thread 1 Default Immed
    allocate_fs_swapmap 0 Default
    alwaysdump 0 Default Immed
    chanq_hash_locks 256 Default
    core_addshmem_read 0 Default Immed
    core_addshmem_write 0 Default Immed
    create_fastlinks 0 Default
    dbc_max_pct 40 40 Immed
    dbc_min_pct 5 Default Immed
    default_disk_ir 0 Default
    disksort_seconds 0 Default
    dma32_pool_size 268435456 Default
    dmp_pathswitch_blks_shift 10 Default
    dmp_rootdev_is_vol 0 Default
    dmp_swapdev_is_vol 0 Default
    dnlc_hash_locks 512 Default
    dontdump 0 Default Immed
    dst 1 Default
    dump_compress_on 1 Default Immed
    enable_idds 0 Default
    eqmemsize 15 Default
    executable_stack 0 Default Immed
    fr_statemax 800000 Default Immed
    fr_tcpidletimeout 86400 Default Immed
    fs_async 1 1
    fs_symlinks 20 Default Immed
    ftable_hash_locks 64 Default
    gvid_no_claim_dev 0 Default
    hp_hfs_mtra_enabled 1 Default
    intr_strobe_ics_pct 100 Default Auto
    io_ports_hash_locks 64 Default
    ioforw_timeout 0 Default Auto
    is_vxtrace_enabled 1 Default
    ksi_alloc_max 32768 (nproc*8) Immed
    ksi_send_max 32 Default
    max_acct_file_size 2560000 Default Immed
    max_async_ports 50 Default
    max_mem_window 0 Default
    max_thread_proc 1024 1024 Immed
    maxdsiz 1073741824 Default Immed
    maxdsiz_64bit 4294967296 Default Immed
    maxfiles 20480 20480
    maxfiles_lim 20480 20480 Immed
    maxrsessiz 8388608 Default
    maxrsessiz_64bit 8388608 Default
    maxssiz 134217728 134217728 Immed
    maxssiz_64bit 1073741824 1073741824 Immed
    maxtsiz 1073741824 1073741824 Immed
    maxtsiz_64bit 1073741824 Default Immed
    maxuprc 3686 ((nproc*9)/10) Immed
    maxvgs 10 Default
    msgmap 4098 (msgtql+2)
    msgmax 8192 Default Immed
    msgmnb 16384 Default Immed
    msgmni 4096 (nproc)
    msgseg 32767 32767
    msgssz 96 Default
    msgtql 4096 (nproc)
    ncdnode 150 Default
    nclist 8292 Default
    ncsize 35840 (ninode+1024)
    nfile 63488 (15*nproc+2048) Imm (auto disabled)
    nflocks 4096 (nproc) Imm (auto disabled)
    ninode 34816 (8*nproc+2048)
    nkthread 7184 (((nproc*7)/4)+16) Immed
    nproc 4096 4096 Immed
    npty 60 Default
    nstrpty 60 60
    nstrtel 60 Default
    nswapdev 10 Default
    nswapfs 10 Default
    nsysmap 8400 Default
    nsysmap64 8400 Default
    o_sync_is_o_dsync 0 Default
    pa_maxssiz_32bit 83648512 Default
    pa_maxssiz_64bit 536870912 Default
    pagezero_daemon_enabled 1 Default Immed
    pfdat_hash_locks 128 Default
    physical_io_buffers 512 Default Auto
    pthread_condvar_prio_boost 0 Default Immed
    region_hash_locks 128 Default
    remote_nfs_swap 0 Default
    rng_bitvals 9876543210 Default
    rng_sleeptime 2 Default
    rtsched_numpri 32 Default
    scroll_lines 100 Default
    scsi_max_qdepth 8 Default Immed
    scsi_maxphys 1048576 Default
    secure_sid_scripts 1 Default Immed
    semaem 16384 Default
    semmni 4096 (nproc)
    semmns 8192 (semmni*2)
    semmnu 4092 (nproc-4)
    semmsl 2048 Default Immed
    semume 100 Default
    semvmx 32767 Default
    sendfile_max 0 Default
    shmmax 8589934592 8589934592 Immed
    shmmni 512 512 Immed
    shmseg 120 120 Immed
    st_ats_enabled 0 Default
    st_fail_overruns 0 Default
    st_large_recs 0 Default
    st_san_safe 0 Default Immed
    streampipes 0 Default
    swapmem_on 1 1
    swchunk 2048 Default
    sysv_hash_locks 128 Default
    tcphashsz 2048 Default
    timeslice 10 Default
    timezone 420 Default
    unlockable_mem 0 Default
    vnode_cd_hash_locks 128 Default
    vnode_hash_locks 128 Default
    vol_checkpt_default 10240 Default
    vol_dcm_replay_size 262144 Default
    vol_default_iodelay 50 Default
    vol_fmr_logsz 4 Default
    vol_max_bchain 32 Default
    vol_max_nconfigs 20 Default
    vol_max_nlogs 20 Default
    vol_max_nmpool_sz 4194304 Default Immed
    vol_max_prm_dgs 1024 Default
    vol_max_rdback_sz 4194304 Default Immed
    vol_max_vol 8388608 Default
    vol_max_wrspool_sz 4194304 Default Immed
    vol_maxio 1024 Default
    vol_maxioctl 32768 Default
    vol_maxkiocount 2048 Default
    vol_maxparallelio 256 Default
    vol_maxspecialio 1024 Default
    vol_maxstablebufsize 256 Default
    vol_min_lowmem_sz 532480 Default Immed
    vol_mvr_maxround 256 Default
    vol_nm_hb_timeout 10 Default
    vol_rootdev_is_vol 0 Default
    vol_rvio_maxpool_sz 4194304 Default Immed
    vol_subdisk_num 4096 Default
    vol_swapdev_is_vol 0 Default
    vol_vvr_transport 1 Default
    vol_vvr_use_nat 0 Default
    volcvm_cluster_size 16 Default
    volcvm_smartsync 1 Default
    voldrl_max_drtregs 2048 Default
    voldrl_min_regionsz 512 Default
    voldrl_volumemax_drtregs 256 Default
    voliomem_chunk_size 65536 Default
    voliomem_maxpool_sz 4194304 Default
    voliot_errbuf_dflt 16384 Default
    voliot_iobuf_default 8192 Default
    voliot_iobuf_limit 131072 Default
    voliot_iobuf_max 65536 Default
    voliot_max_open 32 Default
    volpagemod_max_memsz 6144 Default Immed
    volraid_rsrtransmax 1 Default
    vps_ceiling 64 64
    vps_chatr_ceiling 1048576 Default
    vps_pagesize 4 Default
    vx_maxlink 32767 Default
    vx_ninode 0 Default
    vxfs_bc_bufhwm 0 Default
    vxfs_ifree_timelag 0 Default Immed
    vxtask_max_monitors 32 Default
    - I ran UnixChk.sh completed without no errors and give me SUCCESS message.
    - I use ./setup.sh -console to install in Unix.
    - After the selection of installation modules, location of directories, language, etc. when begin to install OBIEE, it only appears the following message:

    Installing $L(com.siebel.analytics.install.AnyStringConstants,
    InstallConfig.ProductName) $P(SiebelAnalyticsProductBean.productNumber). Please
    wait...

    And the installation never completes, I have made many tests, leaving installation in many ranges of time, from 5 minutes to 8 hours and never complete, the version I am installed is OBIEE 10.1.3.3.3.

    If anyone have a solution for this, I really appreciate.

    Regards,
    Arnulfo